Wall-mounted boiler manufacturers: what is the working principle?
Wall-mounted boiler manufacturer: What is the working principle? Wall-mounted boiler is the general term of natural gas fireplace, the full name is gas wall heating boiler, is a natural gas-powered electric water heater, with cold maintenance, anti-thermal maintenance, unexpected downtime maintenance, high temperature maintenance, centrifugal pump, maintenance and other safety maintenance countermeasures. The natural gas fireplace has a central heating function. The wall-mounted boiler developed by the wall-mounted boiler manufacturer can meet the heating needs of multiple residences. Each house can set a comfortable temperature according to needs, and decide which room can be turned off independently according to needs, but it can also provide large The flow adjustment, constant temperature environmental sanitation soup. Wall-mounted boiler manufacturer: What is the working principle? After the wall-mounted boiler starts the motor to work, the centrifugal fan starts first, the negative pressure of the engine combustion chamber drops, the air pressure switch sends a command to the centrifugal pump, after the centrifugal pump starts, the water flow switch starts the household appliances, And then send the command to the natural gas ratio solenoid valve, the natural gas ratio solenoid valve gradually starts. The natural gas ratio solenoid valve and air pressure are opened and closed, the negative pressure of the engine combustion chamber drops, the air pressure is opened and closed, the air pressure switch sends a command to the centrifugal pump, the centrifugal pump starts, the centrifugal pump starts, the water flow is opened and closed, the water flow switch starts, then the water flow switch starts the household solenoid valve, and then the command cannot be started. In the whole process of daily use, low-temperature files can be set for operation. If you go out for a long time, the water in the ledge can be discharged. When closing the system software, customers should check the sealing characteristics of the gas pipe and the metal bellows in time., Such as wall-mounted burner burner, main heat exchanger, etc. If necessary, remove the metal oxide from the shell, nozzle or igniter, or remove the dust on the main heat exchanger to avoid damage to the working condition and heat transfer effect. In addition, if the wall-hung boiler is close to the service life or the service life protection maintenance customer uses the wall-hung boiler, if it is found that the recent gas consumption has increased or the noise has increased compared with the past, you should consult whether the wall-hung boiler needs to be cleaned or protected. Wall-mounted brands believe that it will take up to three years for wall-mounted brands to be reorganized or protected for maintenance. Wall-mounted boiler manufacturer: If the water pressure of the heating system is often reduced, it should be carefully checked. If the wall hanging itself does not leak water and the equipment is operating normally, the heating system may be in danger of leaking, which may cause the service life of the wall-mounted heating furnace and pipes to be too long in winter. If there is no one at home for a short period of time, the antifreeze setting of the wall-mounted boiler must be turned on to prevent the heater, wall-mounted boiler and other equipment from freezing. The smoke pipe of the wall-mounted boiler sucks the exhaust smoothly and leads directly to the outside to prevent safety risks.
Disclaimer: The content is forwarded from the Internet, and this website does not own the ownership and does not bear the relevant legal responsibility. If you find that this website is suspected of plagiarism, please go to contact us to report, and provide relevant evidence, once verified, this site will immediately delete the suspected infringing content.