undefined

undefined

Enterprise Information

The use of wall-mounted boiler manufacturers product skills

Release time:

2022/05/25 14:00

The products of wall-mounted boiler manufacturers are flexible, convenient, safe, efficient, energy-saving and environmentally friendly. In addition, the device can also be used for two purposes. It can not only keep warm on cold days, but also provide household hot water. Many friends like it very much. But when we use it in our lives, we should also know some safety knowledge and energy-saving skills, so that the wall-mounted boiler will be more comfortable. The wall-mounted boiler is flexible, convenient, safe, efficient, energy-saving and environmentally friendly. In addition, the device can also be used for two purposes. It can not only keep warm on cold days, but also provide household hot water. Many friends like it. But when we use it in our lives, we should also know some safety knowledge and energy-saving skills, so that the wall-mounted boiler will be more comfortable to use. 1. The water pressure of the heating method of the wall-mounted boiler manufacturer's products should not be too high, and 1.2-1.5bar is the most suitable range. The pointer of the boiler pressure gauge should not be less than 1 bar or 2 bar at any time. When it is less than 1 bar, the pressure needs to be supplemented to 1-1.5 bar to ensure the normal operation of the wall-mounted boiler and prevent the wall-mounted boiler from being damaged at high temperatures. 2. Choose the right gas. Most families use wall-mounted boiler gas, and the gas we use must meet the product requirements. If you choose a gas wall-mounted boiler, you must use gas instead of other gases, which will not only damage the equipment, but also cause safety accidents. 3. Ensure that the flue is not blocked. The smoke pipes of wall-mounted boiler manufacturers generally use double core pipes. The outer tube sucks in fresh air, and the inner tube discharges exhaust gas. The two pipes must be unblocked and no one can block them. When installing a wall-mounted boiler, the suction inlet and discharge outlet of the smoke pipe must extend out of the window, and it is not allowed to seal or use a single core pipe indoors. Otherwise, the exhaust gas is easily sucked back, and the oxygen supply is insufficient during combustion, resulting in dangerous phenomena such as boiler ignition failure or frequent start-up, leaving hidden dangers to life and property safety. 4. Place antifreeze. When the wall-mounted boiler or heating system used in winter has water, the wall-mounted boiler must be equipped with antifreeze, without power failure, and sufficient gas to avoid freezing and damage to the heating system and the water pump and heat exchanger of the wall-mounted boiler. Regularly check the water pressure and working conditions of the wall-hung boiler to ensure safety.

see more...

Disclaimer: The content is forwarded from the Internet, and this website does not own the ownership and does not bear the relevant legal responsibility. If you find that this website is suspected of plagiarism, please go to contact us to report, and provide relevant evidence, once verified, this site will immediately delete the suspected infringing content.