undefined

undefined

Enterprise Information

What are the maintenance methods of gas wall-mounted boiler

Release time:

2022/05/19 16:19

What is the maintenance method of the gas wall-mounted boiler? Everyone has their own set of principles when choosing heating tools. Gas wall-mounted boilers are very popular in heating tools. The wall hanging furnace is actually the abbreviation of the gas wall hanging furnace. Can be external indoor thermostat, better control the temperature, to achieve the purpose of energy saving. Let us briefly understand the maintenance method of gas wall hanging boiler. 1. The cause of insufficient pressure failure: After the gas wall-mounted boiler has been running for a long time, its heating system will have a certain pressure drop, which is normal. There may be two reasons: a: The internal pipe sealing of the heating system is not strict, causing the system to leak and the internal water shortage; the internal expansion tank is too small. Lack of air can also cause water pressure to drop. Gas wall-mounted boiler maintenance method: such as the former case, the need to check the maintenance of the heating system; such as the second case, the need to increase the system expansion tank charging. 2. There are many and small reasons for the fire: adjust the faucet when using the gas wall-mounted boiler. If the cold water is too large, the hot water of the wall-mounted boiler will become smaller. On the contrary, if the hot water of the faucet is too large, the cold water of the wall-mounted boiler will become smaller. This will cause the fire of the fireplace to fluctuate, and the hot water will also fluctuate. Maintenance method of gas wall-mounted boiler: When using gas wall-mounted boiler, the temperature of the wall-mounted boiler should be adjusted to an appropriate position, and the faucet should not be opened too much to stabilize the frequency of hot and cold water. 3. Reasons for leakage of storage tanks or water pipes: If the household gas wall-mounted boiler leaks, pay attention. Most of this is due to leakage at the joint. gas boiler repair method: seal ring damage or installation is not qualified. In this case, replace or reinstall the sealing ring.

see more...

Disclaimer: The content is forwarded from the Internet, and this website does not own the ownership and does not bear the relevant legal responsibility. If you find that this website is suspected of plagiarism, please go to contact us to report, and provide relevant evidence, once verified, this site will immediately delete the suspected infringing content.